20000 watts per channel

vedmitra

Member
friends here is a class AB design I made with one of my learned friends, more than 20000 watts per channel,load can be down to 0.25 ohm(in a way can short output wires)distortion from 20hz to 20khz only0.09% on all loads, output voltage more than 70 volts.what else is needed
 

Attachments

  • Copy of 20 kw.JPG
    Copy of 20 kw.JPG
    250.5 KB · Views: 1,179

vedmitra

Member
I have just designed and tested it on simulation

I have just designed and stimulated it on multisim12, got very nice results on every specs. Lots of work has to be done yet,I have massive torrid traffos with me and 50 pairs of genuine motorola 15024 and 25 with me,see my primary wound torrids , big 60 amps. 240 volts primary and the other 40 amps. 240 volts primary, secondry yet to be done.
 

Attachments

  • 100_2200.JPG
    100_2200.JPG
    339.9 KB · Views: 639

vedmitra

Member
With 20 pairs of 15024 and 25 this will be able to give round about 4000 watts, for 20000 watts 100 pairs will be needed and supply will be around 30000 watts, a very huge traffo, one used by electricity dept. will be needed, my big traffo will be able to give enough power for a stereo amp with 20 pairs in each channel
 

vedmitra

Member
Good morning Mr. Feliber,
I have seen that design earlier, as I have told theorticaly Amps can be made of thousands of wattage and can be made practicaly also.but as I earlier said, to run this short amps one will need gigantic power supplies,the circuit i put is basicaly 2500 watts into 4 ohm,load can be taken down to 0.25 ohms and simulations show same characterstics , but to tolerate that short of current output minimum 100 pairs of output transistors will be needed, material I have is only 50 pairs of transistors and traffo of 14400 watts primary,with this i will be able to achieve around 8000 -to- 9000 watts both channel.that is more than sufficient for me.
 

vedmitra

Member
Friends , all will have to wait few days more as my father is not well and I am busy taking his care. meanwhile a snap of my small workshop.
 

Attachments

  • Copy of equipments.JPG
    Copy of equipments.JPG
    283.1 KB · Views: 566

vedmitra

Member
I use these for testing of my amps along with speakers,for power loading capacity
 

Attachments

  • Copy of 100_1736.JPG
    Copy of 100_1736.JPG
    248.4 KB · Views: 191

vedmitra

Member
My collection of Traffo cores around a ton waiting for rewinding, but my Father is first
 

Attachments

  • Copy of 100_1804.JPG
    Copy of 100_1804.JPG
    193.4 KB · Views: 223

vedmitra

Member
This Mike mixer I made in 1983 , in 3days and night, Every work from p.c.b drawing to panel making , fitting , woodwork,done by me ,still in working condition used it for more than 20 years in my stage programmes
 

Attachments

  • Copy of 100_2229.JPG
    Copy of 100_2229.JPG
    213.8 KB · Views: 206

vedmitra

Member
This P.c.b. drill machine which can even drill 4 m.m. hole in 6m.m Iron plate, completely made by me from cutting Iron sheets, welding,turning on lathe machine, fitting, painting,Table top model
 

Attachments

  • Copy of 100_1759.JPG
    Copy of 100_1759.JPG
    340.4 KB · Views: 202

vedmitra

Member
I am sorry folks like I have told earlier,my 84 year old father is very sick and as the only son I have to take his care day and night, so no time for workshop, allthis on net is as i have to be here in his room for all 24 hours.Mean time Photos from one of my linght and sound setup
 

Attachments

  • Copy of 100_2039.JPG
    Copy of 100_2039.JPG
    203.9 KB · Views: 160
  • Copy of 100_2050.JPG
    Copy of 100_2050.JPG
    329.9 KB · Views: 172

vedmitra

Member
Speaker boxes and Amps I am using for my self,Self made,Anybody can produce Sound from branded boxes and Amps, but to produce excellent Sound with your own made Equipments is the Art.
 

Attachments

  • 100_1858.JPG
    100_1858.JPG
    180.6 KB · Views: 224
  • 100_1847.JPG
    100_1847.JPG
    279.4 KB · Views: 212
Top