Lira
Member
Hi Everybody!
It's been a long time that i don't show up, but here it is, an amplifier for starters with a great quality
based on the cheap and popular TDA2050.
There is a resistor and a capacitor called "C" and "R", you can use a 2.2R resistor and a 470nF Capacitor.
This board can be used as well for the TDA2030A, TDA2040, or the LM1875. You just have to change the 680R resistor with one of 560R and the "C" and "R". Always look at the datasheet of the ICS. if you will not use the TDA2050.
All the best!
Lira
It's been a long time that i don't show up, but here it is, an amplifier for starters with a great quality
based on the cheap and popular TDA2050.
There is a resistor and a capacitor called "C" and "R", you can use a 2.2R resistor and a 470nF Capacitor.
This board can be used as well for the TDA2030A, TDA2040, or the LM1875. You just have to change the 680R resistor with one of 560R and the "C" and "R". Always look at the datasheet of the ICS. if you will not use the TDA2050.
All the best!
Lira
