Quad Die Lateral MOSFET Amplifier

Aussieamps

New member
Hi Everyone

This is one of my latest amplifier modules.
It uses a pair Exicon's Dual Die Lateral MOSFET's, the power output from this small module is quite impressive at around 340 watts RMS into 4 ohms.
This is using a +-70 volt supply rail, lower supply rails can be used on this module for lower power outputs. Typically +-35volt rails would work just fine with this module.
The PCB measures 66mm x 50mm
Power Bandwidth of this module is approximately 250khz -3db
THD+N 0.01%

Cheers

Anthony
www.aussieamplifiers.com

nxV200 R3_1 .jpg
 

DjLeco

Moderator
Some measurements?

Sinewave at 100Hz 2 volts under clipping and rectangular at 10kHz, the same, on 8 ohms dummy load?

Thank you!

Nice work!
 
Top