Recent content by kangoo

The input voltage is 120 VDC.

Hi, By the way here is the schematics of the prototype. Note that the "contact" signal starts the converter by feeding a 12 v signal, thus making the PWM outputs to ramp up smoothly. Note also that the converter need real insulation between 120 VDC input section and 12V output, so current feed...

Hi All, I am designing a 100 VDC to 14 volts VDC isolated converter, 70 Amps output. I will use a full bridge, with one single winding also on secondary side. Max Duty cycle is 0.45 Core is a TX58 toroid with Al= 2100 nH per turn and Surface= 152 mm² Bsat=0.15 T PWM frequency is 40 KHz...