Hello fellow MicroSIM, I have a doubt in the calculation of ETD49 I'm testing on the source that is observed in the catch.
For a frequency of 82 kHz, 16 embark in the primary windings, and the secondary for 8 +8 + /-80V.
The core material is Ferroxcube 3C90.
When I have 326V / 2 = 163DC in the primary, the secondary leaves + /-88V DC without load.
This is within the normal?
For a frequency of 82 kHz, 16 embark in the primary windings, and the secondary for 8 +8 + /-80V.
The core material is Ferroxcube 3C90.
When I have 326V / 2 = 163DC in the primary, the secondary leaves + /-88V DC without load.
This is within the normal?
Last edited: