Sandy
New member
Just finishing up a simple coil winder I'm working on so I can wind up some ETD-29 and ETD-39 cores. I had a bunch of metal left over from yet another project and got to it.
I used a Hurst synchronous 30 rpm gear motor I had for yet another project.
Added a few parts from a robotics supply and here it is...
Many questions coming since I'm pretty new at all this.
Sandy
I used a Hurst synchronous 30 rpm gear motor I had for yet another project.
Added a few parts from a robotics supply and here it is...
Many questions coming since I'm pretty new at all this.
Sandy