1.5 KW Class D amplifier based on IRS2092, Commercial

[MicrosiM]

I had Ultiboard, its professional indeed, i think it can generate schematics without PV


regards

 

[kaip]

You can switch of certaing things you dont want to print but not the PVs in my version.
Will have a look later on another computer that has the newest National Instruments Ultiboard version installed.

 

[MicrosiM]

@ kaip

I removed all documents


Many are looking to steal information's from this design


Please Email


Regards


And good luck.....


This will be available as DIY thing soon

 

[lynos]

MicroSim

, good morning, how you know bought a 20mhz ociloscópio of analog.
wish you, me passace where are the points that need to measure in switching power supplies. because your not using it right yet. thank you

 

[MicrosiM]

View attachment 3301, good morning, how you know bought a 20mhz ociloscópio of analog.
wish you, me passace where are the points that need to measure in switching power supplies. because your not using it right yet. thank you

I dont understand your question, and this thread is not for SMPS, its for CLASS-D !

 

[CobraNet]

ok,

this looks a kit?

or DIY with parts? you use easy to find parts?


thank

 

[stewin]

password please mr microsim Thanks!

 

[MicrosiM]

password please mr microsim Thanks!

Hi Stewin



Kai is working at the PCB design at this stage, and when its finished, we will see what to do


thanks

 

[MicrosiM]

Main Amplifier board is complete!

Now the main amplifier board PCB is completed.

This will become reality in some time, but not very soon, because we have to make the PCBs, and we have to TEST them.

This is a TH components version of the Class-D amplifier, without SMD!! comes with power supply and all protections needed!


snap of the MAIN AMPLIFIERS BOARD.


Special thanks goes to Kaip. :w)

 

[luizcpimenta]

@ kaip


attached is the FULL circuit, with missing critical part values, some of them


Please be serious, and make this project available to the DIY, some on in the past tried to do it, then he stole the design.


So I expect nice results from you



You have to make INPUT CARD PCB

And power boards

I dont know about the limiter section where you plan to put it


we can discuss

thanks

What is passoword?

 

[CobraNet]

looks nice built

 

[kaip]

Progress update....

 

[bkastel1]

This looks very promising.

 

[dudaindc]

Nice... really nice...

 

[ackee25]

can u please send the pass word

 

[luizcpimenta]

Here is a commercial 1600W class-d Amplifier based on IRS2092 chip.

Full schematic.

Please, what a password?
Thanks.

 

[MicrosiM]

Password cannot be shared. the PCBs will be made soon

 

[luizcpimenta]

Password cannot be shared. the PCBs will be made soon

Dear. I wonder what the purpose of this forum, since you can not share files. No use the forum there with no help among its members.
Because of this, I will be off the forum.

 

[MicrosiM]

Dear. I wonder what the purpose of this forum, since you can not share files. No use the forum there with no help among its members.
Because of this, I will be off the forum.

@luizcpimenta

It wont be a good idea to leave the forums.

As this is a copyright design, we cannot disclose it.

We have to make new schematics, and modify it in order for us to publish it.

Also, you can engage into this if you like.

KAIP made the PCBs, we need some one who can manufacture them and test them!

Let me know if you can handle the costs.

Regards

 

[luizcpimenta]

@luizcpimenta

It wont be a good idea to leave the forums.

As this is a copyright design, we cannot disclose it.

We have to make new schematics, and modify it in order for us to publish it.

Also, you can engage into this if you like.

KAIP made the PCBs, we need some one who can manufacture them and test them!

Let me know if you can handle the costs.

Regards

You can send to me?
I work with projects amplifiers and would have no difficulty in making the plates.