Hi mj777
I would like to remind all, that
This is a DIY project to learn building class-H Amplifier, and its not designed for commercial use, and you may notice that some circuits needs improvements in the amplifier.
But, the amplifier is fully working, only issue I noticed that a Specific 4N25 chip MUST be used in the CLIP circuit.
Thats the only issue out there, and the TURN on delay circuit may need to adjust some resistor value depends on transistors you are using.
All notes of construction, help, support, will ONLY be discussed here at (www.diysmps.com)
We are not going to discuss, or post ANY information's at (www.diyaudio.com) its just that simple.
Any one buy the PCBs will get COMPLETE support here and at any other forums except (www.diyaudio.com)
Schematics will be sent ONLY to those who buy the PCBs.
Thanks for all