This is not an easy amplifier
Hello
Thanks for all of those who is interested.
This Amplifier uses 4 layers PCB, and the layout is really complex, but the schematic is simple.
There are 3 Ground planes in schematic, and its really confusing for me.
I will give this to some one who is capable of making this amplifier for DIY people, since the schematic of the IRS2092 is almost very close to that over the internet every where.
But the overall circuit is not!. because it includes limiter, tempreture control, etc..
If any one can spend some money on making this amplifier and then publish it to DIY after making some changes, let me know.
Who will make it should be able:-
* Making prototype and assemble a working amplifier, test it, measures, so on later stage we will make it as group buy for all those folks over the internet. DIY
* Professional into electronics
* Can design a PCB, or another folk here can draw it.
I am very busy into other things, that's why I am looking for another folk.
This amplifier is very good in sound quality, since I dont like class-d amplifiers.
But using 2 mosfets for 800W makes me tempt to make it
Good luck for all.